This application enables to control the digital I/O ports of the Arduino UNO microcontroller board through the USB interface of your Android device. All you need is an USB OTG cable and a proper USB cable for the connection. Through the user interface, you can make the digital pins INPUT or OUTPUT and control the LOGIC STATE of each pin by toggle buttons easily.
The Arduino software can be downloaded from the link below:
<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://gist.github.com/eeaslan/5e5373b4710bbc34e03c%26sa%3DD%26usg%3DAFQjCNGaXSVNyCvm4Sit5mYVe0taH1BdOg&sa=D&usg=AFQjCNEMkNBxgnBYpCJ05x3kjjG3KD3XXw" target="_blank">https://gist.github.com/eeaslan/5e5373b4710bbc34e03c</a>
After the installation of the application and when you connect the Arduino Uno board to your Android device, the system asks for a permission and you must give the permission to the app to use the USB interface. Otherwise it won't work.
Note: Tested on Samsung Galaxy S3 with an Arduino Uno R3 board. Please give feedback about any problems.
Caution: Please use this software at your own risk. Be sure about the electrical connections of the Arduino board to avoid any short circuits.
Keywords: Arduino, Arduino Uno, Port Control, Microcontroller, Digital Control, Touch Interface for Arduino.
</div> <div jsname="WJz9Hc" style="display:none">Esta aplicación permite controlar los puertos de E / S digitales de la tarjeta microcontrolador Arduino UNO a través de la interfaz USB de su dispositivo Android. Todo lo que necesitas es un cable OTG USB y un cable USB adecuado para la conexión. A través de la interfaz de usuario, puede hacer que la entrada o salida pines digitales y controlar el estado lógico de cada pin de botones de alternar fácilmente.
El software de Arduino se puede descargar desde el siguiente enlace:
<a href="https://www.google.com/url?q=https://gist.github.com/eeaslan/5e5373b4710bbc34e03c&sa=D&usg=AFQjCNGaXSVNyCvm4Sit5mYVe0taH1BdOg" target="_blank">https://gist.github.com/eeaslan/5e5373b4710bbc34e03c</a>
Después de la instalación de la aplicación y cuando se conecta la placa Arduino Uno a su dispositivo Android, el sistema pide un permiso y tiene que darle el permiso a la aplicación para utilizar la interfaz USB. De lo contrario, no funcionará.
Nota: Probado en Samsung Galaxy S3 con una placa Arduino Uno R3. Por favor, dar su opinión sobre cualquier problema.
Precaución: Por favor, utilice este software a su propio riesgo. Asegúrese acerca de las conexiones eléctricas de la placa Arduino para evitar cualquier cortocircuito.
Palabras clave: Arduino, Arduino Uno, control de puertos, microcontroladores, control digital, interfaz táctil para Arduino.</div> <div class="show-more-end">